
	Trending ▼ ICSE CBSE 10th ISC CBSE 12th CTET GATE UGC NET Vestibulares ResFinder

BEE Energy Textbook 2022 : Energy

28 pages, 81 questions, 0 questions with responses, 0 total responses,

	Pankaj Tiwari Cddfgg	+Fave Message
	Profile Timeline Uploads

Home > tiwaripankaj327 >

Formatting page ...

Ch-02.qxd 2/23/2005 11:21 AM Page 27 2. BOILERS Syllabus Boilers: Types, Combustion in boilers, Performances evaluation, Analysis of losses, Feed water treatment, Blow down, Energy conservation opportunities. 2.1 Introduction A boiler is an enclosed vessel that provides a means for combustion heat to be transferred into water until it becomes heated water or steam. The hot water or steam under pressure is then usable for transferring the heat to a process. Water is a useful and cheap medium for transferring heat to a process. When water is boiled into steam its volume increases about 1,600 times, producing a force that is almost as explosive as gunpowder. This causes the boiler to be extremely dangerous equipment that must be treated with utmost care. The process of heating a liquid until it reaches its gaseous state is called evaporation. Heat is transferred from one body to another by means of (1) radiation, which is the transfer of heat from a hot body to a cold body without a conveying medium, (2) convection, the transfer of heat by a conveying medium, such as air or water and (3) conduction, transfer of heat by actual physical contact, molecule to molecule. Boiler Specification The heating surface is any Typical Boiler Specification part of the boiler metal that has hot gases of comBoiler Make & Year : XYZ & 2003 bustion on one side and MCR(Maximum Continuous Rating) : 10TPH (F & A 100 C) water on the other. Any Rated Working Pressure : 10.54 kg/cm2(g) part of the boiler metal Type of Boiler : 3 Pass Fire tube that actually contributes Fuel Fired : Fuel Oil to making steam is heating surface. The amount of heating surface of a boiler is expressed in square meters. The larger the heating surface a boiler has, the more efficient it becomes. The quantity of the steam produced is indicated in tons of water evaporated to steam per hour. Maximum continuous rating is the hourly evaporation that can be maintained for 24 hours. F & A means the amount of steam generated from water at 100 C to saturated steam at 100 C. Indian Boiler Regulation The Indian Boilers Act was enacted to consolidate and amend the law relating to steam boilers. Indian Boilers Regulation (IBR) was created in exercise of the powers conferred by section 28 & 29 of the Indian Boilers Act. Bureau of Energy Efficiency 27

Related ResPapers
Chapter 4.1 - Boilers
by bee_energy

Chapter 4.5 - Electric Motors and Variable Speed Drives
by bee_energy

Chapter 2.3 - Steam System
by bee_energy

Chapter 2.2 - Boilers
by bee_energy

Formatting page ...

tiwaripankaj327 chat

Horizontal lines at:
Guest Horizontal lines at:
AutoRM Data:
Box geometries: