Trending ▼   ResFinder  

ICSE − Q & A

475 Users in the Group
Moderator: Trisha Pattnaik  
+Join

Ask a Question

Answer a Question!

ResFinder - Thousands of Practice Papers

I m weak in the problems..Which chapters I must prefer more....
asked by Appus nikhil (appus007) 8 years ago
4
CHECK OUT THE COMMENT
asked by Sidra Haider (sidrahaider) 8 years ago
1

+ 1 more questions by sidrahaider  

All d earlier pprs were bad.So I'm nt feeling 2 study...😧😕😢Any tips??????Vry nervous.
asked by Kalyani Bhakat (kalyanibhakat) 8 years ago
3
In Mrs. Pinto’s flat there are 6 bulbs of 100 W each, a heater of 2 kW and 5
fans of 50W each. If these are used everyday as shown below, calculate the
cost of energy consumption for a month of 30 days at the rate of Rs.3.50
per kW h.
6 bulbs of 100 W each used 8 h per day
1 heater of 2 kW used half hour daily
5 fans of 50 W each are used 6 h everyday. 
Anyone..plz help me out wid this!
asked by Aditi Chauhan (aadi786) 8 years ago
2
three cells each of emf 1.5V and internal resistance 2 ohm are connected in parallel.this arrangement sends current in an external resistance of 44 ohm. what is the current through the resistor?
asked by Nh (ayesha1952) 8 years ago
0
state latent heat of fusion
asked by Rayner Cardozo (rayner) 8 years ago
1
sum1 plx upload specimen paper of physics 2016
asked by Diksha. (diksha17) 8 years ago
2
guys anyone got physics notes in this format?

*Definitions

*Relations between units and their derivation

*All derivations mentioned in the scope of syllabus booklet

*Special conditions or characteristics, wherever mentioned

* Examples of turning forces and reasons for the same (They may be asked as 2 mark ‘give reason’ questions)

* Differences

* Factors affecting anything, wherever mentioned

* Factors on which something depends, wherever mentioned

* Special cases, for example in work

* Whether a quantity is a scalar or vector quantity

* Conversions of energy into different forms

* Laws or principles or rules

* Levers in the human body

* All kinds of examples of each class of lever

* M.A. and V.R. of all simple machines and the formulae for the same

* Diagrams with labels

* Critical angle for water and glass

*Absolute refractive index for water and glass

* Minimum angle of delta for which 
asked by Nipun Koli (nio456) 8 years ago
1
what should be the angle between force and displacement be to get the 
1  minimum work?
2 maximum work?
plz answer....................
asked by Andy Pinto (andria) 8 years ago
2
http://www.respaper.com/coolboys98657/3891-pdf.html?cmd=conv
asked by Anonymous (coolboys98657) 8 years ago
1

<< Prev

    Page 405    

Next Page >>


© 2010 - 2024 ResPaper. Terms of ServiceContact Us Advertise with us