Trending ▼   ResFinder  

ICSE Prelims 2016 : (Ryan International School, Nashik)

2 pages, 0 questions, 0 questions with responses, 0 total responses,    0    0
Himanshu Shah
Rangubai Junnare English Med...,  Nasik (Nashik) 
+Fave Message
 Home > sagar1010 >   F Also featured on: School Page

Formatting page ...

Hansa trade links NSK REG OFF: - 4 ,REVATI ELEGANCE.,ATHRAVA COL., SAVARKAR NAGAR , NASHIK 13, PH.NO- 0253 2344410 /70 Push pulls Meter. Push pull Meter is a force measuring instrument for both Push and Pull. There is ZERO ADJUST. An additional red pointer retains the maximum reading encountered. Accuracy: Range gms 300 500 1000 1 division Least Count gms 2.5 5 10 W mm H mm Weight gms 24 24 24 220 220 220 300 300 300 2000 3000 5000 10000 20000 30000 50000 20 25 50 100 200 250 500 24 24 24 30 30 30 30 220 220 230 230 230 230 230 300 300 400 400 400 400 400 Weights & Dimensions are nominal. Push pull Meter is a force measuring instrument for both push and pull. RED POINTER retains the maximum reading encountered. By rotating it anti-clockwise set it to zero again. Because of gravity the METER when held inclined (or upside down) shows reading different then when held vertically. To nullify gravity effect, turn ZERO ADJUST holding the METER the same way as will be held while measuring. Spot calibration gives better results. Apply standard force (the one nearest to the force to be measured), and with the ZERO ADJUST make the instrument read the value of the standard force. METERS with capacities below 2 kg. May require a light tap to overcome static friction. To prevent damages to inside parts, hold the pushing/pulling ROD firmly while changing accessories at its ends. Do not push the PULL END or pull the PUSH END. It has overload capacity of 30%. METER can be clamped on SQUARE BODY .

Formatting page ...

Related ResPapers
ICSE Board Specimen 2016 : Physical Education
by icse 
Learners` Academy-Chemistry Paper
by luciaksh 
ICSE Board Specimen 2016 : Cookery
by icse 
English 1 2016 question paper
by rebel456 

 

  Print intermediate debugging step

Show debugging info


 

 


© 2010 - 2026 ResPaper. Terms of ServiceContact Us Advertise with us

 

sagar1010 chat